|
Lubricators and tools for maintenance |
|||||||||
 |
Lubricating elements |
||||||||
| Code nos. | Description | ||||||||
 |
Protective
dust seals for round head lubricators
type P 17 |
||||||||
| IP.17 | Protection for hydraulic lubricators P17 | ||||||||
 |
Concave
head lubricators type R26
R26 Pressure assembly stem |
||||||||
| IM.06/R26/A | Lubricator concave head straight with smooth stem "LUB" mm. 6 | ||||||||
| IM.08/R26/B | Lubricator concave head straight with smooth stem "LUB" mm. 8 | ||||||||
| IM.10/R26/C | Lubricator concave head straight with smooth stem "LUB" mm.10 | ||||||||
 |
Lubricator
concave head type R23
Assembly stem threaded hexagonal concave head mm.10. R23 thread in mm. and gas. |
||||||||
| IM.06.1/R23/B | Lubricator concave head straight with threaded stem 6x1 hexagon10 | ||||||||
| IM.08.1/R23/B | Lubricator concave head straight with threaded stem 8x1 hexagon 10 | ||||||||
| IM.08.1.25/R23/B | Lubricator concave head straight with threaded stem 8x1,25 hexagon 10 | ||||||||
| IM.10.1/R23/C | Lubricator concave head straight with threaded stem 10x1 hexagon 11 | ||||||||
| IM.10.1.5/R23/C | Lubricator concave head straight with threaded stem 10x1,5 hexagon 11 | ||||||||
| IG.1.8/R23/C | Lubricator concave head straight with threaded stem 1/8G hexagon 11 | ||||||||
| IG.1.4/R23/D | Lubricator concave head straight with threaded stem 1/4G hexagon 14 | ||||||||
 |
Lubricator
type R1
Cylindrical assembly stem flat head hexagonal mm.15. R1 thread in mm. and gas. |
||||||||
| IM.06.1/R1 | Lubricator flat head simple 6x1 hexagon 15 | ||||||||
| IM.08.1/R1 | Lubricator flat head simple 8x1 hexagon 15 | ||||||||
| IM.08.1.25/R1 | Lubricator flat head simple 8x1,25 hexagon 15 | ||||||||
| IM.10.1/R1 | Lubricator flat head simple 10x1 hexagon 15 | ||||||||
| IM.10.1.25/R1 | Lubricator flat head simple 10x1,25 hexagon 15 | ||||||||
| IM.10.1.5/R1 | Lubricator flat head simple 10x1,5 hexagon 15 | ||||||||
| IG.1.8/R1 | Lubricator flat head simple 1/8G hexagon 15 | ||||||||
| IG.1.4/R1 | Lubricator flat head simple 1/4G hexagon 15 | ||||||||
 |
Lubricator
type R3
Assembly stem hexagonal with key mm.15 flat head hexagonal. R3 thread in mm. and gas. |
||||||||
| IM.08.1/R3 | Lubricator flat head double 8x1 hexagon 15 | ||||||||
| IM.08.1.25/R3 | Lubricator flat head double 8x1,25 hexagon 15 | ||||||||
| IM.10.1/R3 | Lubricator flat head double 10x1 hexagon 15 | ||||||||
| IM.10.1.25/R3 | Lubricator flat head double 10x1,25 hexagon 15 | ||||||||
| IM.10.1.5/R3 | Lubricator flat head double 10x1,5 hexagon 15 | ||||||||
| IM.12.1.5/R3 | Lubricator flat head double 12x1,5 hexagon 15 | ||||||||
| IM.12.1.75/R3 | Lubricator flat head double 12x1,75 hexagon 15 | ||||||||
| IG.1.8/R3 | Lubricator flat head double 1/8G hexagon 15 | ||||||||
| IG.1.4/R3 | Lubricator flat head double 1/4G hexagon 15 | ||||||||
 |
Lubricator
type R8
Assembly stem hexagonal mm.22 rounded flat head. R8 thread gas. |
||||||||
| IG.1.4/R8 | Lubricator rounded flat head 1/4G hexagon 22 | ||||||||
| IG.3.8/R8 | Lubricator rounded flat head 3/8G hexagon 22 | ||||||||
 |
Lubricator
type R11
Assembly stem hexagonal with key mm. 19 flat hexagonal head mm. 15. R11 filetto gas. |
||||||||
| IG.3.8/R11/A | Lubricator 2 pieces double flat head 3/8G hexagon 15 | ||||||||
| IG.1.2/R11/B | Lubricator 2 pieces double flat head 1/2G hexagon 15 | ||||||||
 |
Lubricator
type R65
Assembly stem hexagonal with key mm. 14 flat head hexagonal mm. 15 can be dismantled through 45 degrees. R65 thread gas. |
||||||||
| IG.1.8/R65 | Lubricator 2 pieces flat head degrees 45 1/8G hexagon 15 | ||||||||
| IG.1.4/R65 | Lubricator 2 pieces flat head degrees 45 1/4G hexagon 15 | ||||||||
 |
Lubricator
type R66
Assembly stem hexagonal with key mm. 14 flat head hexagonal mm. 15 can be dismantled through 90 degrees. R66 thread gas. |
||||||||
| IG.1.8/R66 | Lubricator 2 pieces flat head degrees 90 1/8G hexagon 15 | ||||||||
| IG.1.4/R66 | Lubricator 2 pieces flat head degrees 90 1/4G hexagon 15 | ||||||||
 |
Lubricator
typpe R109
hexagon variable for series AÆ 7 / BÆ 8 / CÆ 10 ball head straight type R109Pressure assembly stem. |
||||||||
| IM.06/R109/A | Lubricator ball head straight smooth pin mm. 6 hexagon 7 | ||||||||
| IM.08/R109/B | Lubricator ball head straight smooth pin mm. 8 hexagon 9 | ||||||||
| IM.10/R109/C | Lubricator ball head straight smooth pin mm. 10 hexagon 11 | ||||||||
 |
Grease
ejection valve type R14
Assembly stem hexagonal with key mm.11 R14 thread in mm. |
||||||||
| IM.10.1/R14 | Lubricator grease ejection 10x1 hexagon 11 | ||||||||
 |
Lubricator
type R17
Assembly stem hexagonal with key mm.7 - mm.9- mm.11- mm.14 ball head straight type R17 thread in mm. and gas. |
||||||||
| IM.06.1/R17/A | Lubricator ball head straight 6x1 hexagon 7 | ||||||||
| IM08.1/R17/B | Lubricator ball head straight 8x1 hexagon 9 | ||||||||
| IM.08.1.25/R17/B | Lubricator ball head straight 8x1,25 hexagon 9 | ||||||||
| IM.06.1/R17/C | Lubricator ball head straight 6x1 hexagon 11 | ||||||||
| IM.10.1/R17/C | Lubricator ball head straight 10x1 hexagon 11 | ||||||||
| IM.10.1.25/R17/C | Lubricator ball head straight 10x1,25 hexagon 11 | ||||||||
| IM.10.1.5/R17/C | Lubricator ball head straight 10x1,5 hexagon 11 | ||||||||
| IG.1.8/R17/C | Lubricator ball head straight 1/8G hexagon 11 | ||||||||
| IM.12.1.5/R17/D | Lubricator ball head straight 12x1,5 hexagon 14 | ||||||||
| IM.12.1.75/R17/D | Lubricator ball head straight 12x1,75 hexagon 14 | ||||||||
| IG.1.4/R17/D | Lubricator ball head straight 1/4G hexagon 14 | ||||||||
 |
Lubricator
with extension type R72
Assembly stem hexagonal with key mm.7 ball head straight type. R72 thread in mm. extension mm.14 total length mm.30 |
||||||||
| IM.06.1/R72 | Lubricator long ball head straight 6x1 hexagon 7 | ||||||||
 |
Lubricator
type R18
Assembly stem hexagonal with key mm.11 ball head at 45 degrees R18 thread in mm. and gas. |
||||||||
| IM.06.1/R18/A | Lubricator ball head degrees 45 6x1 hexagon 11 | ||||||||
| IM.08.1/R18/A | Lubricator ball head degrees 45 8x1 hexagon 11 | ||||||||
| IM.08.1.25/R18/A | Lubricator ball head degrees 45 8x1,25 hexagon 11 | ||||||||
| IM.10.1/R18/A | Lubricator ball head degrees 45 10x1 hexagon 11 | ||||||||
| IM.10.1.25/R18/A | Lubricator ball head degrees 45 10x1,25 hexagon 11 | ||||||||
| IM.10.1.5/R18/A | Lubricator ball head degrees 45 10x1,5 hexagon 11 | ||||||||
| IG.1.4/R18/B | Lubricator ball head degrees 45 1/4G hexagon 14 | ||||||||
 |
Lubricator
type R20
Assembly stem hexagonal with key mm.11 ball head at 90 degrees R20 thread in mm. and gas. |
||||||||
| IM.06.1/R20/A | Lubricator ball head degrees 90 6x1 hexagon 11 | ||||||||
| IM.08.1/R20/A | Lubricator ball head degrees 90 8x1 hexagon 11 | ||||||||
| IM.08.1.25/R20/A | Lubricator ball head degrees 90 8x1,25 hexagon 11 | ||||||||
| IM.10.1/R20/A | Lubricator ball head degrees 90 10x1 hexagon 11 | ||||||||
| IM.10.1.25/R20/A | Lubricator ball head degrees 90 10x1,25 hexagon 11 | ||||||||
| IM.10.1.5/R20/A | Lubricator ball head degrees 90 10x1,5 hexagon 11 | ||||||||
| IG.1.4/R20/B | Lubricator ball head degrees 90 1/4G hexagon 14 | ||||||||
 |
Stauffer
type lubricators in brass
This type of lubricator is automatic. It does not need a pump. Just fill the cap and thread it until the desired amount of grease has been injected. R36 thread in mm. and gas. |
||||||||
| IS.06.1/R36/A | Lubricator Stauffer in brass N° 00 6x1 | ||||||||
| IS.1.8/R36/B | Lubricator Stauffer in brass N° 0 1/8G | ||||||||
| IS.1.8/R36/C | Lubricator Stauffer in brass N° 1 1/8G | ||||||||
| IS.1.8/R36/D | Lubricator Stauffer in brass N° 2 1/8G | ||||||||
| IS.1.4/R36/D | Lubricator Stauffer in brass N° 2 1/4G | ||||||||
| IS.1.4/R36/E | Lubricator Stauffer in brass N° 3 1/4G | ||||||||
| IS.1.4/R36/F | Lubricator Stauffer in brass N° 4 1/4G | ||||||||
| IS.1.4/R36/G | Lubricator Stauffer in brass N° 5 1/4G | ||||||||
 |
Stauffer
type lubricators in polished steel
This type of lubricator is automatic. It does not need a pump. Just fill the cap and thread it until the desired amount of grease has been injected. R36 thread gas. |
||||||||
| IS.1.8/R36/M | Lubricator Stauffer in polished steel N° 1 1/8G | ||||||||
| IS.1.4/R36/N | Lubricator Stauffer in polished steel N° 2 1/4G | ||||||||
| IS.1.4/R36/P | Lubricator Stauffer in polished steel N° 3 1/4G | ||||||||
| IS.1.4/R36/Q | Lubricator Stauffer in polished steel N° 4 1/4G | ||||||||
| IS.1.4/R36/R | Lubricator Stauffer in polished steel N° 5 1/4G | ||||||||
 |
Extensions
for Stauffer lubricators
R105 thread gas. |
||||||||
| IS.1.8/R105/A | Extension for Stauffer tube and brass connection1/8G length mm. 80 | ||||||||
| IS.1.8/R105/B | Extension for Stauffer tube and brass connection1/8G length mm.100 | ||||||||
| IS.1.8/R105/C | Extension for Stauffer tube and brass connection1/8G length mm.120 | ||||||||
| IS.1.4/R105/D | Extension for Stauffer tube and brass connection1/4G length mm. 80 | ||||||||
| IS.1.4/R105/E | Extension for Stauffer tube and brass connection1/4G length mm.100 | ||||||||
| IS.1.4/R105/F | Extension for Stauffer tube and brass connection1/4G length mm.120 | ||||||||
 |
Withdrawal
syringe with polished steel chamber
and point as requested R38 - R39 |
||||||||
| IO/R48/A | Withdrawal syringe with concave point type "ZERCH" Æ 23 length mm.90 gr.30 | ||||||||
| IO/R48/B | Withdrawal syringe with concave point type "ZERCH" Æ 30 length mm.90 gr.50 | ||||||||
| IO/R48/C | Withdrawal syringe with concave point type "ZERCH" Æ 45 length mm.130 gr.200 | ||||||||
| IO/R48/D | Withdrawal syringe with concave point type "ZERCH" Æ 60 length mm.180 gr.500 | ||||||||
 |
Manual compressor with polished steel chamber | ||||||||
| II/R88/A | Compressor for loose grease Æ 45 length mm. 200 gr. 250 | ||||||||
| II/R88/B | Compressor for cartridges or loose grease Æ 57 length mm. 290 gr. 500 | ||||||||
| II/R88/C | Compressor for loose grease Æ 57 length mm. 340 gr. 750 | ||||||||
| II/R88/D | Compressor for cartridges or loose grease Æ 57 length mm. 385 gr.1000 | ||||||||
| II/R88/E | Compressor for cartridges or loose grease Æ 59 length mm. 385 gr.1000 | ||||||||
 |
High pressure manual compressor with zinc chromed chamber | ||||||||
| II/R92/A | Compressor series "IDEAL" high pressure zinc chromed Æ 45 length mm.190 gr. 250 | ||||||||
| II/R92/B | Compressor series "IDEAL" high pressure zinc chromed Æ 60 length mm.280 gr.500 | ||||||||
| II/R92/C | Compressor series "IDEAL" high pressure zinc chromed Æ 60 length mm.360 gr.750 | ||||||||
| II/R92/D | Compressor series "IDEAL" high pressure zinc chromed Æ 60 length mm.390 gr.1000 | ||||||||
 |
Grease cartridges for manual compressors |
||||||||
| II/R90/A | Grease cartridge body Æ 52 length 240 gr. 400 | ||||||||
| II/R90/B | Grease cartridge body Æ 52 length 300 gr. 600 | ||||||||
| II/R90/C | Grease cartridge body Æ 54 length 500 gr. 600 | ||||||||
 |
Pointed
tip "LUB" type
R38 thread in mm. |
||||||||
| II.10.1/ R38 /B | Pointed tip "LUB" type 10x1 | ||||||||
 |
Flared
tip "ZERCH" type
R39 thread in mm. |
||||||||
| II.10.1/R39/B | Flared tip"ZERCH" type 10x1 | ||||||||
 |
Converse head with frontal insertion R40 thread in mm. |
||||||||
| II.10.1/R40 | Converse head 10x1 | ||||||||
 |
Normal
head with rear insertion
R42 thread in mm. |
||||||||
| II.10.1/R42 | Normal head 10x1 | ||||||||
 |
Head with rear insertion and thread on head for adjustable blocking on lubricator. R99 thread in mm. |
||||||||
| II.10.1/R99/A | Adjustable head mm. 15 10x1 | ||||||||
| II.10.1/R99/C | Adjustable head mm. 22 10x1 | ||||||||
 |
Giant head Fiat type for caterpillar tractors R103 thread in mm. |
||||||||
| II.10.1/R103 | Giant head for caterpillar tractors "FIAT" type 10x1 | ||||||||
 |
Claw
head supplied in several types and 3 and 4 claws of different qualities
R43 thread in mm. 3 griffe quality economic. R114 thread in mm. 3 griffe quality medium. R128 thread in mm. 4 griffe alta quality professional. R129 thread in mm. 4 griffe quality high. R130 thread in mm. 4 griffe quality economic. |
||||||||
| II.10.1/R43 | Head 3 claw hydraulic type 10x1 key mm. 13 | ||||||||
| II.10.1/R114 | Head 3 claw steel hydraulic type 10x1 hexagon mm. 15 | ||||||||
| II.10.1/R128 | Head 4 claw type Excellent 10x1 | ||||||||
| II.10.1/R129 | Head 4 claw type "Prof" 10x1 | ||||||||
| II.10.1/R130 | Head 4 claw steel hydraulic type 10x1 | ||||||||
 |
Head 90 degree 3 claw R101 thread in mm.3 claw unique model. |
||||||||
| II.10.1/R101 | Head 3 claw hydraulic type degrees 90 10x1 | ||||||||
 |
Tubes
for grease compressors
different lengths |
||||||||
| II.10.1/R91/A | Nylon tube for compressors section mm. 4x10,5 length mm.200 10x1 | ||||||||
| II.10.1/R91/B | Nylon tube for compressors section mm. 4x10,5 length mm.300 10x1 | ||||||||
| II.10.1/R91/C | Nylon tube for compressors section mm. 4x10,5 length mm.400 10x1 | ||||||||
| II.10.1/R91/D | Nylon tube for compressors section mm. 4x10,5 length mm.500 10x1 | ||||||||
| II.10.1/R91/E | Nylon tube for compressors section mm. 4x10,5 length mm.600 10x1 | ||||||||
| II.10.1/R91/F | Nylon tube for compressors section mm. 4x10,5 length mm.700 10x1 | ||||||||
| II.10.1/R91/G | Nylon tube for compressors section mm. 4x10,5 length mm.1000 10x1 | ||||||||
| II.10.1/R91/H | Nylon tube for compressors section mm. 4x10,5 length mm.1500 10x1 | ||||||||
| II.10.1/R91/K | Rubber tube for compressors section mm. 4x10,5 length mm.300 10x1 | ||||||||
| II.10.1/R91/L | Rubber tube for compressors section mm. 4x10,5 length mm.400 10x1 | ||||||||
| II.10.1/R91/M | Rubber tube for compressors section mm. 4x10,5 length mm.500 10x1 | ||||||||
| II.10.1/R91/N | Rubber tube for compressors section mm. 4x10,5 length mm.600 10x1 | ||||||||
| II.10.1/R91/P | Rubber tube for compressors section mm. 4x10,5 length mm.700 10x1 | ||||||||
| II.10.1/R91/Q | Rubber tube for compressors section mm. 4x10,5 length mm.1000 10x1 | ||||||||
| II.10.1/R91/T | Nylon tube for compressors section mm. 4x8 length mm.300 10x1 | ||||||||
| II.10.1/R91/U | Nylon tube for compressors section mm. 4x8 length mm.400 10x1 | ||||||||